HP 3PAR Operating System Software - Manual (Page 51)

Description Field Group
The manufacturer's recommended lower-limit alarm level. Low Alarm Threshold
The manufacturer's recommended upper-limit alarm level. High Alarm Threshold
Viewing System iSCSI Ports
To view system iSCSI port information:
1.
Navigate to the Ports screen.
2. In the Management Window, click the iSCSI tab.
The iSCSI tab is divided into a list pane and a detail pane. The list pane displays a summary of
all iSCSI ports in the system. The detail pane displays detailed information about a single port
selected from the list pane.
List Pane
The list pane displays the following information:
Description Column
The port location in Node:Slot:Port format. Position
The MAC address of the connected device. MAC
The state of the port. See “System and Component Status Icons” (page 508) . State
IP address of the iSCSI port. IP Address
Netmask address for the iSCSI interface. Subnet Mask
The address of a local IP router on the same network as the system, used to forward
traffic to destinations beyond the local network. Gateway
Maximum Transmission Unit. The greatest amount of data or "packet" size that can
be transferred at one time over a particular network connection without MTU
overburdening the connection. The default MTU setting for an iSCSI port is 1500.
When supported by the network, an MTU value of 9000 should be used.
The partner port. Partner
Viewing System Ports 51