HP 3PAR Operating System Software - Manual (Page 176)

Settings Tab
The following information is displayed in the detail pane's Settings tab:
Description Field Group
Indicates if the selected volume is fully
provisioned or a thinly provisioned
virtual volume. Provisioning User Space Provisioning
The name of the CPG from which user
space is provisioned. CPG
If enabled, the allocation warning
percentage. Allocation Warning
If enabled, the allocation limit. Allocation Limit
The disk type, Fast Class (FC), Nearline
(NL), or Solid State (SSD). Device Type User Space Allocation
The speed of the disk. Device RPM
NOTE: The Device RPM number does not represent a rotational speed for
the drives without spinning media (SSDs). It is meant as a rough estimation of
the performance difference between the drive and the other drives in the system.
For FC and NL drives, the number corresponds to both a performance measure
and actual rotational speed. For an SSD drive, the number is to be treated as
relative performance benchmark that takes into account in I/O per second,
bandwidth, and the access time.
The RAID type of the disk. RAID Type
The availability characteristics. Configured Availability
The level of failure tolerance for this
volume: , Cage, Port,
or Magazine. Availability
The set size. Set Size
The number of contiguous bytes in KiB. Step Size
Indicates if the selected volume is fully
provisioned or a thinly provisioned
virtual volume. Provisioning Copy Space Provisioning
The name of the CPG from which user
space is provisioned. CPG
If enabled, the allocation warning
percentage. Allocation Warning
176 Virtual Volumes