HP 3PAR Operating System Software - Manual (Page 435)

i. Select the range for the number of I/O operations (I/O Size Columns): 512 bytes to 16
megabytes. The default range is 4k to 1m.
6. Click Next to go to the Summary page, or click Finish to complete the wizard.
Summary
Review your settings, then click Finish to complete the wizard.
Creating a Logical Disks Space Report
The Logical Disks Space report displays total and raw logical disk space over a selected time
interval. The X-axis (category) represents time, and the Y-axis (value) indicates the amount of logical
disk space. For the Total LD Space chart, free, used, and total values are shown in a different color
on the same chart.
A table below the chart lists the following values:
Description Column
The date and time usage information was collected. (Shown only for values over time chart
types.) Time
The logical disk space that is mapped to virtual volumes. Used
The logical disk space that is not mapped to virtual volumes. Note that logging and preserved
data LDs cannot be mapped to virtual volumes and appear as free space. Free
The total logical disk space (Used Space + Free Space). Total
The raw physical disk space used by the logical disks. Raw
For values at a specified time chart types, the table may also display the logical disk name, domain
name, CPG name, device type, RAID type, set size, step size, row size, and owner.
Logical Disks Space report for values over a time interval:
Logical Disks Space report for values at a specified time:
Creating Reports 435