HP 3PAR Operating System Software - Manual (Page 193)

Editing an AO Configuration
To edit an existing AO configuration:
1.
Navigate to the AO Configurations screen.
2. Right-click on the name of the AO configuration you want to edit, then select Edit from the
menu list.
The Edit AO Configuration dialog box appears.
3. You can change the Name, Mode, and up to two CPGs.
NOTE: Data moves resulting from your configuration changes can impact performance.
4. Click OK to accept the changes.
Deleting an AO Configuration
To delete an AO configuration:
1.
Navigate to the AO Configurations screen.
2. Right-click on the name of the AO configuration you want to delete, then select Remove from
the menu list. All schedules associated with this AO configuration are also removed.
The Remove AO Configuration(s) confirmation dialog appears.
3. Click OK.
Starting an AO Configuration
To start an AO configuration, select Run Now, and follow the instructions in “Schedule AO”
(page 455) .
Removing a Tier CPG from an AO Configuration
To remove a tier CPG from an AO Configuration:
1.
Set the growth warning limit of the CPG to 1 MiB. (Do not set it to 0 as this will disable the
warning limit.) If you remove a CPG (tier) from an AO configuration without first making sure
that all the data from the tier is moved to other tiers, then that data remains on the CPG even
after the CPG is removed from the AO configuration. Therefore, you should move the data
on that CPG to other tiers before removed the tier CPG from the AO configuration. Setting
the growth warning limit to 1 MiB does this because the smallest region size is 32 MiB.
2. Either start the AO configuration manually or wait for a scheduled run. Since the growth
warning limit is set to 1 MiB, when the configuration starts, it should move all the space out
of that CPG. If there is a large amount of space that needs to be moved, however, the Start
AO configuration procedure might need to be repeated several times until the CPG is empty.
3. Once the CPG is empty, you can then remove the CPG from the AO Configuration by editing
the AO configuration. For more information, see
“Editing an AO Configuration” (page 193) .
Viewing an AO Configuration
To view an AO Configuration:
1.
Select on Provisioning in the Manager Pane.
2. In the Management Tree, expand the name of the storage system containing the AO
configuration you want to view.
3. In the Management Tree, select AO configurations.
4. The AO configurations window appears with the following tabs:
“The AO Configurations Tab” (page 194)
“The Tasks Tab” (page 196)
Editing an AO Configuration 193