HP 3PAR Operating System Software - Manual (Page 481)

Description Column
The model name, if applicable. Model Name*
The drive cage firmware version. Firmware Version
The type of drive cage (DC2, DC3, DC4, DCS1, or DCS2) Cage Type
The position of the drive cage in the drive chassis. Cage Position
The World Wide Name of the drive cage. WWN
*Not displayed when viewing information for an individual system.
Viewing the Cage Subsystems Interface Cards Tab
The Cage Subsystems Interface Cards tab displays information about the system's interface cards.
To access the Cage Subsystems Interface Cards tab, select the Interface Cards tab after accessing
the Cage Subsystem tab.
The Cage Subsystems Interface Cards tab displays the following information:
Description Column
The name of the system. System*
The drive cage in which the interface card is located. Cage
The interface card name. Name
The manufacturer of the interface card. Manufacturer
The interface card serial number. Serial Number*
The part number of the interface card. Part Number*
The assembly's serial number. Assembly Serial Number
The assembly's part number. Assembly Part Number
The spare part number, if applicable. Spare Part Number*
The assembly revision, if applicable. Assembly Revision*
The model name, if applicable. Model Name*
The interface card firmware version. Firmware Version
The type of drive cage (DC2, DC3, DC4, DCS1, or DCS2) Cage Type
The position of the drive cage in the drive chassis. Cage Position
*Not displayed when viewing information for an individual system.
Viewing the Cage Subsystems Interface Cards Tab 481