Managing qos rules, Configuring qos settings – HP 3PAR Operating System Software User Manual
Page 159
Description
Field
Group
Select the device type, Fast Class (FC), Near Line (NL), or Solid
State Device (SSD). The capacity and capacity usage of the
selected device type is displayed in graphical form.
Device Type
Capacity
Displays the allocation of user, copy, and admin space.
Virtual Volume
Allocation
Indicates whether a QoS rule is enabled for the selected virtual
volume set.
QoS Enabled
QoS Settings
The maximum number of IOs/sec the virtual volume set can
operate at.
I/O Limit
The maximum number of KBs/sec the virtual volume set can
operate at.
Bandwidth Limit
The information displayed on the Virtual Volumes, VLUNs, Hosts, and Alerts tabs is identical to
that displayed for virtual volumes. For more information, refer to the following sections:
“Viewing the Virtual Volumes Tab” (page 169)
Managing QoS Rules
Quality of Service (QoS) is a mechanism that ensures the highest level of performance by establishing
rules for limiting I/O bandwidth and the number of I/O operations per second. QoS is configured
on a virtual volume set basis. Existing virtual volume sets can be used, or a new set can be created
for the purpose of creating a QoS rule to specific volumes in an exported set. For example, suppose
you have four virtual volumes in the virtual volume set VVSet1, exported to the host HostSet1, but
you want to apply a QoS Rule to only two of the volumes in VVSet1. To accomplish this, create a
new virtual volume set, QoS_VVSet in this example, add the two virtual volumes to which you want
to apply the QoS rule, and do not export the new set.
The HP 3PAR Management Console allows you to perform the following QoS actions for virtual
volume sets:
•
Configure QoS settings
•
Clear QoS settings
•
Enable QoS
•
Disable QoS
Configuring QoS Settings
To configure QoS settings for a virtual volume set:
Managing QoS Rules
159