HP 3PAR Operating System Software - Manual (Page 265)

showrcopy
NAME
showrcopy -- The showrcopy command displays details of the Remote Copy configuration. The
showrcopy command also displays the group’s domain names if the global -listdom option
is used or if the TPDLISTDOM environment variable is set.
SYNTAX
The syntax for the showrcopy command can be one of the following:
•
showrcopy [options ] [links]
•
showrcopy [options ] [groups []]
•
showrcopy [options ] [targets []]
AUTHORITY
Any role in the system.
OPTIONS
-d
Displays more detailed configuration information.
-domain [,...]
Shows only Remote Copy links whose virtual volumes are in domains with names that match
one or more of the specified domain name or pattern. This option does not allow listing objects
within a domain of which the user is not a member.
SPECIFIERS
links
Specifies all Remote Copy links.
groups []
Specifies either all Remote Copy volume groups or a specific Remote Copy volume group by
name or by glob-style pattern.
targets []
Specifies either all target definitions or a specific target definition by name or by glob-style
pattern.
RESTRICTIONS
This command requires the HP 3PAR Remote Copy Software license. Contact your local service
provider for further information.
EXAMPLES
The following example displays output from the showrcopy command:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System2 9 IP ready mirror_config
Link Information
Target Node Address Status Options
System2 0 10.100.33.11 Up
System2 1 10.101.33.11 Up
265