HP 3PAR Operating System Software - Manual (Page 245)

growvv
NAME
growvv -- The growvv command increases the size of a virtual volume.
SYNTAX
growvv [g|G|t|T]
AUTHORITY
Super, Edit
Any role granted the vv_grow right.
NOTE: You need access to the domain of the specified group () in order to run
this command.
OPTIONS
None.
SPECIFIERS
The name of the volume to be grown.
[g|G|t|T]
The size to be added to the volume’s user space. The size is specified in multiples of 256 MB.
You can optionally specify the grow size in gigabytes (g or G) or in terabytes (t or T).
RESTRICTIONS
•
In order to grow a virtual volume in a Remote Copy group, that group must first be stopped.
•
You must grow the corresponding virtual volume on the secondary system by the same amount
or the Remote Copy group will not restart.
EXAMPLES
The following example increases the size of virtual volume vv1 by two terabytes:
# growvv vv1 2t
NOTES
Ensure that there is sufficient space to mirror the grow of the volume on the secondary system before
growing the volume on the primary system.
245