HP 3PAR Operating System Software - Manual (Page 136)

Target Node Address Status Options
SystemB 0:2:1 20210002AC0000C3 Up
SystemB 1:2:1 21210002AC0000C3 Up
SystemC 0:3:1 10.100.33.63 Up
SystemC 1:3:1 10.101.33.63 Up
receive 0:2:1 20210002AC0000C3 Up
receive 1:2:1 21210002AC0000C3 Up
receive 0:3:1 receive Up
receive 1:3:1 receive Up
Group Information
Name Target Status Role Mode Options
multi.1 SystemB Started Primary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 100 testvv.0 200 Synced NA
testvv.1 101 testvv.1 201 Synced NA
testvv.2 102 testvv.2 202 Synced NA
testvv.3 103 testvv.3 203 Synced NA
Name Target Status Role Mode Options
multi.1 SystemC Started Primary Periodic Last-Sync 2009-06-29 12:00:20
PDT , Period 5m, over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 100 testvv.0 300 Synced 2009-06-29 12:01:01 PDT
testvv.1 101 testvv.1 301 Synced 2009-06-29 12:01:07 PDT
testvv.2 102 testvv.2 302 Synced 2009-06-29 12:01:02 PDT
testvv.3 103 testvv.3 303 Synced 2009-06-29 12:01:05 PDT
Synchronous Backup System (SystemB)
When all systems are up, the showrcopy command output on the synchronous backup systems
(for example, SystemB) looks like the output for this example Synchronous Long Distance
configuration:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
SystemA 46 FC ready 2FF70002AC000060 mirror_config
SystemC 47 IP ready mirror_config
Link Information
Target Node Address Status Options
SystemA 0:2:1 20210002AC000060 Up
SystemA 1:2:1 21210002AC000060 Up
SystemC 0:4:1 10.100.33.63 Up
SystemC 1:4:1 10.101.33.63 Up
receive 0:2:1 20210002AC000060 Up
receive 1:2:1 21210002AC000060 Up
receive 0:4:1 receive Up
receive 1:4:1 receive Up
Group Information
Name Target Status Role Mode Options
multi.1.r96 SystemA Started Secondary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
136 Disaster Recovery for Synchronous Long Distance