HP 3PAR Operating System Software - Manual (Page 127)

System Information during Failover
Synchronous Mode
When a failure occurs on systems with synchronous mode volume groups such that all links between
the systems are broken:
•
After 15 seconds, the system marks the sending links as Down.
•
After another 15 seconds, the system marks the targets as failed.
Asynchronous Periodic Mode
When a failure occurs on systems with asynchronous periodic mode volume groups such that all
links between the systems are broken:
•
After 25 seconds, the system marks the sending links as Down.
•
After another 200 seconds, the system marks the targets as failed.
Example Output after Primary System Failure
For example, if the primary system (for example, System1) contains asynchronous periodic mode
volume groups and becomes unavailable, 300 seconds later the showrcopy output on one of the
backup systems (for example, System2) looks like:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System1 7 IP failed mirror_config
Link Information
Target Node Address Status Options
System1 0 10.100.33.96 Down
System1 1 10.101.33.96 Down
receive 0 10.100.33.96 Down
receive 1 10.101.33.96 Down
Group Information
Name Target Status Role Mode Options
periodic_group_1.r96 System1 Stopped Secondary Periodic over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 21 localvv.0 413 Stopped Thu Dec 14 18:23:52 PST 2006
remotevv.1 22 localvv.1 414 Stopped Thu Dec 14 18:23:52 PST 2006
System Information during Failover 127