Server-port-map-range – HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem User Manual
Page 96

Command line 96
Item
Description
->show role domain
Displays the authentication order for the domain user role
->show role *
Displays the authentication order for all user roles
server-port-map-range
Manage ranges of shared server downlink port mapping configurations.
Supported actions: add, help, remove
Item
Description
add server-port-
map-range
Add a new server port network mapping range, and allow server ports to be shared
among multiple VC Ethernet networks.
Syntax
add server-port-map-range Set Name> VLANIDs= [MatchUplinkSet= Parameters ConnectionId (required) The ID of an existing Ethernet connection associated with a profile and a server Properties Uplinkset (required) The name of the shared uplink set to use with the server port mapping VLANIDs (required) The VLAN IDs to use for the mapping. The format is a comma-separated list of VLAN ID ranges, where a range is either a single VLAN ID or a hyphen-separated pair of VLAN IDs that identify a range of VLAN IDs. Valid VLAN ID values include 1 to 4094. MatchUplinkSet (optional) Requires that the VLANs used for mappings match the VLAN IDs specified on the associated uplink set attribute (but will use the uplink set VLAN IDs from the uplink set). If there are already server port map entries for the specified profile connection, associated uplink set attribute specified. The default value of this attribute is "false". Examples ->add server-port-map-range MyProfile:1 UplinkSet=MyUplinkSet1 VLanIds=101-124,214 Adds multiple networks to a server-port-map ->add server-port-map-range MyProfile:2 UplinkSet=MyUplinkSet2 VLanIds=1-20 MatchUplinkSet=true Adds multiple networks to a server-port-map and locks VLANs to an uplink set Item Description remove server-port- map-range Remove one or more server port network mappings. Syntax remove server-port-map-range Range List> Parameters ConnectionId (required) The ID of an existing Ethernet connection associated with a profile and a server VLANIDs (required) The list of VLAN IDs to be removed from the mapping. The format is a comma-separated list of VLAN ID ranges, where a range is either a single VLAN ID
port. The format of the ConnectionID is
identified Uplink Set. If set to false, the command will not set the profile connection
then either the uplink set must match or the port map entries must not have the
port. The format of the Connection ID is
- Virtual Connect Flex-10.10D Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem