HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 76)

Command line 76
Item Description
->add network MyNewNetwork2 UplinkSet=MyUplinkSet VLanID=145
Creates a new network and uses a shared uplink port set
->add network FcoeNetwork -fcoe UplinkSet=MyUplinkSet
VLanID=100
Creates a new FCoE network
->add network Network1 Private=Enabled
Configures a private network when adding a new network
->add network Network1 UplinkSet=Uplinkset1 VLANID=100
NativeVLAN=Enabled
Creates a new network with a shared uplinkset and tags it as Native VLAN
->add network Network1 ConnectionMode=Failover
Creates a new network and sets the connection mode as failover
->add network Network1 VLanTunnel=Enabled
Creates a new network and enables VLAN tunneling
->add network Network1 PrefSpeedType=Custom PrefSpeed=4000
MaxSpeedType=Custom MaxSpeed=6000
Creates a new network with a preferred connection speed of 4Gb and a maximum
connection speed of 6Gb
->add network Network1 ConnectionMode=Auto
LacpTimer=Domain-Default
Creates a new network using the domain default LACP timer
->add network Network1 Labels="label1, label2"
Creates a new network with labels label1 and label2
->add network Network1 Color=red
Creates a new network with the color red
Item Description
remove network Remove a network from the domain. To remove a network, it cannot be in use by any
server profiles.
Syntax
remove network
Parameter
NetworkName
(required)
The name of an existing network in the domain. Use "*" to remove all networks.
Examples
->remove network MyNetwork
Removes a specified network
->remove network *
Removes all networks
Item Description
set network Modify an existing Ethernet or FCoE network.
Syntax
set network [-quiet] [State=]
[SmartLink=][NativeVLAN=]
[Private=]
[Nags=[,,...]] [Name=]
[VLanId=] [ConnectionMode=]
[VLanTunnel=] [PrefSpeedType=]
[PrefSpeed=<100Mb–10Gb in 100Mb increments>]
[MaxSpeedType=] [MaxSpeed=<100Mb–10Gb in
100Mb increments>]
[LacpTimer=]
[Labels=[,…]
[Color=]
Parameter