Iscsi-boot-param – HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem User Manual
Page 48

Command line 48
Item
Description
->show interconnect
Displays a summary of all interconnect modules
->show interconnect *
Displays detailed information for all interconnect modules
->show interconnect *:5
Displays detailed information for all enclosures with interconnect modules in
interconnect bay number 5
->show interconnect enc0:*
Displays interconnect modules in all bays of a specific enclosure
->show interconnect enc0:3
Displays detailed information on a specific interconnect module in interconnect
bay 3 of the primary enclosure
iscsi-boot-param
Manage iSCSI boot parameters within a domain.
NOTE:
The iscsi-boot-param command does not currently support IPv6 addresses.
Supported actions: help, remove, set, show
Item
Description
remove
iscsi-boot-param
Remove all iSCSI boot parameters configured on the specified iSCSI
connection.
Syntax
remove iscsi-boot-param
Parameter
ConnectionID
(required)
The ID of an existing iSCSI connection. The ID format is
retrieve the port number of the iSCSI connection, use the show profile
Example
->remove iscsi-boot-param MyProfile1:1
Removes boot parameters configured on connection 1 of MyProfile1
Item
Description
set iscsi-boot-param
Configure the basic iSCSI boot parameters on the specified iSCSI connection.
Syntax
set iscsi-boot-param
[-maskMutualSecret]
[BootOrder=
[LUN= name>] [InitiatorIP= [Gateway= [TargetName= [TargetPort= Target IP>] [TargetPort2= [Authentication= [Secret= [MutualSecret= [iSCSIBootParamDHCP= [NetworkParamDHCP= [DHCPVendorID=
- Virtual Connect Flex-10.10D Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem