HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 85)

Command line 85
Item Description
remove profile Remove one or more server profiles from the domain.
Syntax
remove profile
Parameter
ProfileName
(required)
The name of an existing profile in the VC domain. Use "*" to remove all existing
profiles.
Examples
->remove profile MyProfile
Removes a server profile by name
->remove profile *
Removes all server profiles
Item Description
save profile Save an EFI data object from an existing server profile. The server profile must not
be assigned to a server bay.
Syntax
save profile
address=
-or-
save profile
address= filename=
Parameter
ProfileName
(required)
An existing and unassigned profile in the domain.
Properties
address (required) A valid IP address, with username, password, and the name of the EFI data file that
will be stored on the FTP server.
filename (required) The name of the EFI data file that will be stored on the FTP server. The filename can
be mentioned separately.
The file path is treated as relative to the login directory for the user on the FTP server.
The user should ensure that the permissions are appropriate for the transfer to
succeed.
Examples
->save profile Profile_1
address=ftp://user:[email protected]/new-profile-data
Transfer a profile EFI data object file to a remote server
->save profile Profile_1
address=ftp://user:[email protected]
filename=/new-profile-data
Transfer a profile EFI data object file to a remote server
->save profile Profile1
address=ftp://user:password@[2001::1]/new-profile-data
Transfer a profile EFI data object file to a remote server using an IPv6 address
->save profile Profile1
address=ftp://user:password@[2001::1]
filename=/new-profile-data
Transfer a profile EFI data object file to a remote server using an IPv6 address
Item Description
set profile Modify properties of an existing server profile.
Syntax
set profile [Name=] [EFIState=absent]
[HideUnusedFlexNICs=] [Nag=]
Parameter