HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 74)

Command line 74
Item Description
management of large numbers of networks. Labels can be assigned in the
CLI, but are only used in the GUI. A maximum of 16 labels can be
assigned.
Color (optional) Color assigned to these networks. Color is used in the GUI to help with
management of large numbers of networks. A color can be assigned in
the CLI, but is only used in the GUI. Allowed colors are red, green, blue,
purple, or orange.
Example
->set network-range UplinkSet=Alpha
VLANIDs=1-10,21-30 SmartLink=Enabled
Changes the SmartLink setting for multiple networks
network
Manage Virtual Connect Ethernet networks.
Supported actions: add, help, remove, set, show
Item Description
add network Create a new Ethernet or FCoE network. An FCoE network is associated to an uplink
port set. After the network is created, uplink ports can be added if the network is not
using a shared uplink set.
The SmartLink property is no longer supported during the creation of the network. If
specified, it is ignored. To configure the SmartLink attribute, use the set network
command.
If the QoS type is set to "CustomNoFcoe", a "cannot add fabric when QoS
configuration type is CustomNoFCoE" error message appears. For more information
about setting the QoS type, see "qos (on page 90 )."
Syntax
add network [-quiet][-fcoe]
[Nags=[,,...]] [UplinkSet=
VLanID=] [State=]
[NativeVLAN=] [Private=]
[ConnectionMode=]
[VLanTunnel=] [PrefSpeedType=]
[PrefSpeed=<100Mb–10Gb in 100Mb increments]
[MaxSpeedType=] [MaxSpeed=<100Mb–10Gb in
100Mb increments>]
[LacpTimer=]
[Labels=[,…]
[Color=]
Parameter
NetworkName
(required)
The unique name of the new network to create. Valid characters include alphanumeric,
"_", and ".". The maximum length of the name is 64 characters.
Options
Quiet Suppresses user confirmation prompts during network creation and modification. This
option is used mainly in automated scripting scenarios.
fcoe Specifies an FCoE network.
Properties
Nags (optional) The names of the existing network access groups of which this network is a member,
separated by commas. Do not use spaces unless they are enclosed in quotation marks.
If no network access groups are specified, the domain default network access group
(Default) is used. This property is not allowed for an FCoE network.