HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 109)

Command line 109
Item Description
->show ssh
Displays the SSH key configuration
ssl-certificate
View and upload the SSL certificate from a remote FTP server.
Supported actions: help, load, show
Item Description
load ssl-certificate Transfer an SSL certificate from a remote FTP server and apply it to the VCM
web server. After a new SSL certificate is applied, the web server resets.
When renewing certificates, the upload removes any previous Signed
Certificate from VCM. You must add a new certificate or update with a
renewed certificate in your browser. See browser Help for information on
installing or renewing certificates.
Syntax
load ssl-certificate
Address=
-or-
load ssl-certificate
Address=
Filename=
Properties
Address (required) A valid IP address of the FTP server, with user name, password, and name of
the SSL certificate file to transfer.
Place brackets around the IPv6 address in the FTP URL.
Filename (required) The name of the SSL certificate file to transfer. The filename can also be
mentioned separately.
The file path given will be treated as relative to the login directory for the user
on the FTP server. The user should ensure that the permissions are
appropriate for the transfer to succeed.
Examples
->load ssl-certificate
Address=ftp://user:[email protected]/my-new-ssl.
crt
Transfers a new custom SSL certificate from the remote FTP server
->load ssl-certificate
Address=ftp://user:[email protected]
Filename=my-new-ssl.crt
Transfers a new custom SSL Certificate from the remote FTP server
->load ssl-certificate
Address=ftp://user:password@[2001:1::1]/my-new-ssl.cr
t
Transfers a new custom SSL certificate from the remote FTP server using an
IPv6 address
->load ssl-certificate
Address=ftp://user:password@[2001:1::1]
filename=/my-new-ssl.crt
Transfers a new custom SSL certificate from the remote FTP server using an
IPv6 address