HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem User Manual
Page 84

Command line 84
Item
Description
->assign profile MyProfile1 enc0:5
Assigns a profile to a multi-blade server in bays 5-8 of the primary enclosure
Item
Description
copy profile
Copy an existing profile configuration to another profile. The copied profile
(destination profile) is left unassigned.
Syntax
copy profile
Parameter
src_profile_name
(required)
The name of the profile from which the configuration is being copied.
dest_profile_name
(required)
The name of the profile to which the configuration is being copied.
Example
->copy profile_server1 profile_server_new
Copies the configuration from profile_server1 to profile_server_new
Item
Description
load profile
Load a saved EFI data object from a remote ftp server on the network. The EFI data
object is loaded into an existing server profile. The server profile must not be
assigned to a server bay and it must not have an EFI data object present.
Syntax
load profile
address=
-or-
load profile
address=
Parameter
ProfileName
(required)
An existing and unassigned profile with no EFI data.
Properties
address (required) A valid IPv4 or IPv6 address or host name of the FTP server, including user name
and password.
filename (required) The name of the file on the FTP server where EFI data is loaded. The filename can be
mentioned separately.
The file path given is treated as relative to the login directory for the user on the FTP
server. The user should ensure that the permissions are appropriate for the transfer
to succeed.
Examples
->load profile Profile_1
address=ftp://user:[email protected]/new-profile-data
Loads a saved profile EFI data object file from a remote server
->load profile Profile_1
address=ftp://user:[email protected]
filename=/new-profile-data
Loads a saved profile EFI data object file from a remote server
->load profile Profile1
address=ftp://user:password@[2001::1]/new-profile-data
Loads a saved profile EFI data object file from a remote server using an IPv6
address
->load profile Profile1
address=ftp://user:password@[2001::1]
filename=/new-profile-data
Loads a saved profile EFI data object file from a remote server using an IPv6
address
- Virtual Connect Flex-10.10D Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem