HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 101)

Command line 101
Item Description
Syntax
reboot server [-Force] [-ForceOnTimeout]
[-timeout=
Parameter
ServerID (required) The ID of a server in the domain. The format of the server ID is
. If the EnclosureID is not specified, the local
enclosure is used by default. Use "*" to reboot all servers in the domain. For a
multi-blade server, the ServerID must be that of the monarch bay. This is the ID
displayed by the show server command.
Options
Force Forces a reboot operation without waiting for the operating system to shut down
gracefully. Only use this option as a last resort, because it can cause potential data
loss on the server.
ForceOnTimeout Attempts a graceful shutdown, but if the server does not shut down within the
timeout period (60 seconds by default), then the server is forced to reboot.
Timeout Specifies the timeout period (in seconds) to wait for the operation to complete (per
server). The default timeout is 120 seconds.
Examples
->reboot server 2
Reboots the server in device bay 2 of the local enclosure
->reboot server enc0:2 -Force
Forces the server in device bay 2 of the local enclosure to reboot
->reboot server * -ForceOnTimeout -Timeout=180
Attempts a graceful shutdown, but forces a reboot on all servers after a timeout of 2
minutes
->reboot server *
Reboots all servers in the domain
->reboot server enc0:*
Reboots all servers in the local enclosure
->reboot server enc0:1
Reboots the multi-blade server in bays 1-4 of the local enclosure
Item Description
show server Display all servers in the domain.
Syntax
show server
Parameter
ServerID (optional) The ID of a server in the domain. The format of the server ID is
. If the EnclosureID is not specified, the local enclosure is
used by default. For a multi-blade server, the ServerID must be that of the monarch
bay. This is the ID shown in the summary listing.
Examples
->show server
Displays a summary of all servers
->show server *
Displays detailed information for all servers
->show server enc1:*
Displays detailed information for all servers in a remote enclosure
->show server enc0:4
Displays detailed information for the server in device bay 4 of the local enclosure
->show server enc0:5
Displays detailed information for the multi-blade server in bays 5-8 of the local
enclosure