HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 19)

Command line 19
Item Description
Examples
->set auto-deployment TftpMode=Manual
TftpServer=192.168.1.1
TftpFile=myconfig.script
Use a specified TFTP server as the configuration script source used for
deployment
->set auto-deployment TftpMode=Auto
Use DHCP for automatic discovery of the configuration script source
Item Description
show auto-deployment This command displays properties related to auto-deployment. This includes the
current status, deployment log, the configuration script used for deployment,
and the command output generated from the configuration of the domain during
deployment.
Syntax
show auto-deployment [[status] [log] [config] [output]]
Examples
->show auto-deployment
->show auto-deployment status
Display the status of auto-deployment along with its settings
->show auto-deployment log
Display the deployment log
->show auto-deployment config
Display the configuration script used in the deployment
->show auto-deployment output
Display the output generated from executing the configuration script
Item Description
start auto-deployment This command initiates the auto-deployment process. During deployment,
servers are powered off, the domain is cleared, and the configuration is
deployed using the configuration script downloaded from the remote TFTP
server. This command might cause the current user session to log out during the
deployment process.
Syntax
start auto-deployment
Examples
->start auto-deployment
Starts a new deployment process
Item Description
stop auto-deployment Stop a deployment operation that is in progress.
Syntax
stop auto-deployment
Examples
->stop auto-deployment
Stops an in-progress deployment operation