HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem User Manual
Page 75

Command line 75
Item
Description
UplinkSet
(optional)
The name of an existing shared uplink set to use with this network. If this property is
specified, a valid VLAN ID must also be provided. The limit is 32 networks per shared
uplink set. This property is required for an FCoE network.
VLanID (optional) The VLAN ID associated with the network (used with the shared uplink set only). The
VLAN ID is a valid number between 1 and 4094. This property is required for an FCoE
network.
State (optional) Enables or disables the network. Valid values are "Enabled" and "Disabled". The
default value is "Enabled".
NativeVLAN
(optional)
Enables or disables the network to act as a native VLAN. Valid values are "Enabled"
and "Disabled". The default value is "Disabled". This property can be specified only if
the network is a shared Ethernet network.
Private
(optional)
Enables or disables the network to act as a private network. Valid values are "Enabled"
and "Disabled". The default value is "Disabled". This property is not allowed for an
FCoE network.
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to the
network. Valid values include "Auto" and "Failover". The default value is "Auto".
VLanTunnel
(optional)
Enables or disables VLAN tag tunneling. If enabled, VLAN tags are passed through the
domain without any modification. If disabled, all tagged frames are discarded. This
property is not allowed for an FCoE network.
If multiple networks are configured on any server port, this option cannot be modified.
PrefSpeedType
(optional)
The default connection speed for any Ethernet connection attached to this network.
Valid values include "Auto" and "Custom". "Custom" enables you to configure the
preferred speed. The default value is "Auto".
PrefSpeed
(required if
PrefSpeedType is
"Custom")
The connection speed for any Ethernet connection attached to this network. Valid
values range from 100Mb to 10Gb in 100Mb increments.
MaxSpeedType
(Optional)
The maximum connection speed for any Ethernet connection attached to this network.
Valid values include "Unrestricted" and "Custom". "Custom" enables you to configure
the preferred speed. The default value is "Unrestricted".
MaxSpeed
(required if
MaxSpeedType is
"Custom")
The maximum connection speed for any Ethernet connection attached to this network.
Valid values range from 100Mb to 10Gb in 100Mb increments.
LacpTimer
(optional)
Specifies the network LACP timer. Valid values are "Domain-Default", "Short", and
"Long". This property can be specified only if the network is not a network associated
with a Shared Uplink Set, or the ConnectionMode property value is "Auto". The default
value is "Short".
Labels (optional) Labels assigned to this network. Labels are used in the GUI to help manage large
numbers of networks. Labels can be assigned in the CLI, but are only used in the GUI.
A maximum of 16 labels can be assigned.
Color (optional) Color assigned to this network. Color is used in the GUI to help manage large numbers
of networks. A color can be assigned in the CLI, but is only used in the GUI. Allowed
colors are red, green, blue, purple, or orange.
Examples
->add network MyNewNetwork
Creates a new network, and then adds it to the domain as a member of the Default
network access group
->add network Network1 nags=DatabaseNetGroup,AccessNetGroup
Creates a network named Network1 and assigns it to network access groups
DatabaseNetGroup and AccessNetGroup
- Virtual Connect Flex-10.10D Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem