HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 81)

Command line 81
Item Description
->set port-monitor Enabled=false
Disables port monitoring
Item Description
show port-monitor Display the Virtual Connect port monitor configuration.
Syntax
show port-monitor
Example
->show port-monitor
Displays the port monitor configuration
port-protect
Monitor the server downlink ports for the pause flood condition or network loop condition and take protective
action by disabling the port.
For information about port-protect settings, see "Configuring network loop protection settings (on page
173 )."
Supported actions: help, reset, set, show
Item Description
reset port-protect Reset and restart all ports that are currently disabled due to the protection action.
Syntax
reset port-protect
Example
->reset port-protect
Resets the port-protection state on all ports currently disabled due to the port
protection action
Item Description
set port-protect Modify the domain wide configuration for port protection against the following
denial of service conditions:
• Network loop protection for server downlink ports
• Pause flood protection for downlink physical ports
Syntax
set port-protect [-quiet] [networkLoop=]
[pauseFlood=]
Option
quiet (optional) Suppresses user confirmation prompts. This option is useful when scripting
operations.
Properties
networkLoop
(required)
Enables/disables downlink network loop detection and protection. Valid values are
"Enabled" and "Disabled".
pauseFlood
(required)
Enables/disables pause flood detection and protection. Valid values are "Enabled"
and "Disabled".
Example
->set port-protect networkLoop=Enabled PauseFlood=Enabled
Sets the global option to enable the loop protection and pause flood protection