HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem User Manual
Page 23

Command line 23
Item
Description
->restore configbackup
address=ftp://user:[email protected]:2000/new-vc-con
fig-backup
->restore configbackup
address=ftp://[2001::50]:2000/new-vc-config-backup
Restores a configuration backup file from a remote FTP server with a
user-specified port number.
Item
Description
save configbackup
Generate and transfer a Virtual Connect configuration backup file to a remote
TFTP or FTP server.
Syntax
save configbackup [-maskEncryptKey]
address= ftp://user:password@ipaddress/[filename]> [encryptionkey= Option maskEncryptKey (optional) Enables you to interactively specify the encryption key as a masked string at the Properties Address (required) A valid IP address of a TFTP or FTP server with user name and password (where needed) and the name of the configuration backup file. If not specified, the relative to the login directory for the user on the FTP server. Be sure that the permissions are appropriate for a successful transfer. EncryptionKey (optional) A password used to encrypt the configuration backup file Examples ->save configbackup address=tftp://192.168.10.12/new-vc-config-backup ->save configbackup address=tftp://[2001::50]/new-vc-config-backup Saves a configuration backup file to a remote TFTP server ->save configbackup address=ftp://user:[email protected]/new-vc-config-b ackup ->save configbackup address=ftp://user:password@[2001::50]/new-vc-config-back up Saves a configuration backup file to a remote FTP server ->save configbackup address=ftp://user:[email protected]/new-vc-config-b ackup encryptionkey=secret ->save configbackup address=ftp://user:password@[2001::50]/new-vc-config-back up encryptionkey=secret Saves a configuration backup file to a remote FTP server with an encryption key ->save configbackup -maskEncryptKey address=ftp://user:[email protected]/new-vc-config-b ackup ->save configbackup -maskEncryptKey address=ftp://user:password@[2001::50]/new-vc-config-back up Saves a configuration backup file to a remote FTP server with a masked encryption key
command prompt
default file name is "vc-config-backup". The file path specified is treated as
- Virtual Connect Flex-10.10D Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem