HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 28)

Command line 28
Supported actions: help, import, remove, show
Item Description
import enclosure Import local and remote enclosures into the VC domain. VC supports up to four
c7000 enclosures in a single domain.
Syntax
import enclosure []
[UserName=] [Password=]
[DoubleDense=]
For enclosures that are not imported, the password field is optional. If not
specified, the system interactively prompts you for the password.
Parameter
IpAddress (Optional) The address or DNS name of the remote enclosure to be imported. If not
specified, the local enclosure is assumed.
Option
quiet This option suppresses user confirmation prompt while importing a remote
enclosure, and is typically used in automated scripting scenarios.
Properties
UserName (Required for
enclosures that are
not imported)
A valid user name with access to the Onboard Administrator for the enclosure to
import. The user must have full administrative rights to all enclosure elements,
such as device bays, I/O bays, and OAs).
Password (Required) A valid OA user password for importing the enclosure. If no password is
specified, the system interactively prompts you for a password during the import
operation.
DoubleDense
(Optional)
This setting can only be specified during the import of the local enclosure, and it
affects the behavior of all other enclosures imported later.
If the enclosure being imported supports double-dense servers, this property
enables the device bay display format to display double-dense servers. The
default behavior is to display single-dense servers in the enclosure.
Examples
->import enclosure UserName=Administrator Password=fgg7h*1
Imports the local enclosure into the domain
->import enclosure UserName=Administrator Password=fgg7h*1
DoubleDense=true
Imports the local enclosure with a double-dense device bay display format
->import enclosure 2001::34/64 UserName=admin
password=am123
Imports a remote enclosure into the domain
->import enclosure
Imports the previously discovered local enclosure
->import enclosure 192.168.0.120
Imports a previously discovered remote enclosure
Item Description
remove enclosure Remove a remote enclosure that has been imported into the domain. The local
enclosure cannot be removed from the domain using the remove enclosure
command.
Syntax
remove enclosure
Parameter
EnclosureID
(required)
The enclosure ID of the remote enclosure to be removed from the domain. Use "*"
to remove all remote enclosures in the domain. The enclosure IDs can be
identified for a particular enclosure by using the show enclosure command.
The local enclosure cannot be removed from the domain with this command.