HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 67)

Command line 67
Item Description
Syntax
set mcast-filter [Name=]
[Labels=[,...]
[Color=]
Parameter
McastFilterName (required) The name of an existing Multicast Filter to modify
Properties
Labels (optional) Labels assigned to this multicast filter. Labels are used in the GUI to help
manage large numbers of filters. Labels can be assigned in the CLI, but
are only used in the GUI. A maximum of 16 labels can be assigned.
Color (optional) Color assigned to this multicast filter. Color is used in the GUI to help
manage large numbers of filters. A color can be assigned in the CLI, but is
only used in the GUI. Allowed colors are red, green, blue, purple, or
orange.
Name (optional) The new name of the Multicast filter
Examples
->set mcast-filter Blue Name=Red
Changes the name of an existing Multicast Filter from "Blue" to "Red"
->set mcast-filter Filter1 Labels="label1, label2"
Adds labels to a multicast filter
->set mcast-filter Filter1 Labels=
Removes all labels from a filter
->set mcast-filter Filter1 Color=red
Sets the network color to red
Item Description
show mcast-filter Display information about the Multicast Filter.
Syntax
show mcast-filter | *
Parameter
McastFilterName (optional) Name of a Multicast Filter existing in the VC domain. "*" displays a
detailed view of all the Multicast filters. The default behavior displays a
summary output of all Multicast filters.
Examples
->show mcast-filter
Display a summary listing of all Multicast Filters
->show mcast-filter *
Show detailed information for all Multicast Filters
->show mcast-filter Filter1
Show detailed information for a specific Multicast Filter
mfs-filter
Manage Multicast Filters in Multicast Filtersets.
Supported actions: help, add, remove
Item Description
add mfs-filter Add a Multicast Filter to a Multicast Filterset.
Syntax
add mfs-filter FilterSet=
McastFilter=[,,...]