HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 73)

Command line 73
Item Description
UplinkSet (required) The name of the shared uplink set from which the networks are being
removed
VLANIds (required) The list of VLAN IDs (comma separated list of VLAN ID ranges) to be
deleted from the shared uplink set. For this command, the shared uplink
set and list of VLAN IDs identify the networks to be deleted, not the
network names.
Example
->remove network-range UplinkSet=Alpha
VLANIDs=1-10,15,21-30
Removes networks from an existing uplink set
Item Description
set network-range Change the configuration of multiple networks in a shared uplink set.
Syntax
set network-range [-quiet] UplinkSet=
VLANIds=
list> [State=]
[PrefSpeedType=] [PrefSpeed=<100Mb-10Gb
in 100Mb steps>] [MaxSpeedType=]
[MaxSpeed=<100Mb-10Gb in 100Mb steps>]
[Nags=[,...]
[SmartLink=]
[Labels=[,...]
[Color=]
Options
quiet This option suppresses user confirmation prompts. This option is useful
when scripting operations.
Properties
UplinkSet (required) The name of an existing shared uplink port set to use with the networks.
VLANIds (required) A comma separated list of VLAN ranges that identify the networks in the
shared uplink port set being modified.
State (optional) Enables or disables the networks. Valid values are "Enabled" and
"Disabled". The default value is "Enabled".
PrefSpeedType (optional) The default connection speed for any Ethernet connection attached to
these networks. Valid values include "Auto" and "Custom". "Custom"
enables you to configure the preferred speed. The default value is "Auto".
PrefSpeed (required if
PrefSpeedType is "Custom")
The connection speed for any Ethernet connection attached to these
networks. Valid values range from 100Mb to 10Gb in 100Mb
increments.
MaxSpeedType (Optional) The maximum connection speed for any Ethernet connection attached to
these networks. Valid values include "Unrestricted" and "Custom".
"Custom" enables you to configure the preferred speed. The default value
is "Unrestricted".
MaxSpeed (required if
MaxSpeedType is "Custom")
The maximum connection speed for any Ethernet connection attached to
these networks. Valid values range from 100Mb to 10Gb in 100Mb
increments.
Nags (optional) The network access groups to which the networks belong, separated by
commas. Do not use spaces unless they are enclosed in quotation marks.
If nags is not specified, the network access groups are not changed.
SmartLink (optional) Enables or disables the SmartLink capability for the networks. Valid values
include "Enabled" and "Disabled".
Labels (optional) Labels assigned to these networks. Labels are used in the GUI to help with