Qos-map – HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem User Manual
Page 89

Command line 89
Item
Description
Examples
->set qos-classifier Uplinks classifiers=DOT1P,DSCP
Configures uplink ports to use "DSCP" and "DOT1P" to prioritize the ingress
traffic
->set qos-classifier All classifiers=DOT1P
Configures all ports to use "DOT1P" to classify the ingress traffic
Item
Description
show qos-classifier
Display the QoS classifier configuration of the active QoS configuration
Syntax
show qos-classifier [
Parameter
PortType (optional)
The type of port to which the classifiers are assigned. Valid values are "Uplinks"
and "Downlinks". If the port type is not specified, then classifiers for all port
types are displayed.
Examples
->show qos-classifier
Displays the classifier settings for both uplink and downlink ports
->show qos-classifier Uplinks
Displays the classifier settings for uplink ports
->show qos-classifier Downlinks
Displays the classifier settings for downlink ports
qos-map
Manage the traffic classification maps of the active QoS configuration.
Supported actions: help, set, show
Item
Description
set qos-map
Modify the traffic classification maps of the active QoS configuration
Syntax
set qos-map DOT1P value range list> Parameter Type (required) The classifier type for the map. Valid values are "DOT1P" and "DSCP". Properties Class (required) The destination traffic class name. Values are mapped to the pre-defined classes. A map is active if the map is currently in use for traffic classification. All traffic classes in an active map must be enabled. A value in a map can be disabled classes. Values (required) The list of DOT1P priority values or DSCP values for the map. The format is a comma separated list of single values or hyphen-separated ranges. For a unique. Ingress non-FCoE traffic with a value of 3 is mapped to a user configured traffic class. FCoE traffic (typically tagged with a DOT1P value of 3) a DSCP map, the supported DSCP values are: AF11(DSCP 10), AF12(DSCP12), AF13(DSCP 14), AF21(DSCP18), AF22(DSCP 20), AF41(DSCP 34), AF42(DSCP 36), AF43(DSCP 38), EF(DSCP 46), CS0(DSCP 0), CS1(DSCP 8), CS2 (DSCP 16), CS3(DSCP 24), CS4(DSCP 32), CS5(DSCP
mapped to one class only. An inactive map can have both enabled and
DOT1P map, the supported DOT1P priority values are 0-7. The value 3 is
is always mapped to the FCoE_Lossless class, regardless of the map values. For
AF23(DSCP 22), AF31(DSCP 26), AF32(DSCP 28), AF33(DSCP 30),
- Virtual Connect Flex-10.10D Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem