HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 64)

Command line 64
Item Description
Syntax
remove mcast-filter-rule McastFilter=
[Network=|*]
Properties
McastFilter (required) The name of an existing Multicast Filter to which the Multicast Filter rule
belongs
Network (required) Network IP Addresses in the form of IP Address/Netmask Bits. The IP
Address must be a unique mcast address and should be the starting
address of an IP subnet. A Network named "*" removes all the filter rules.
Examples
->remove mcast-filter-rule McastFilter=Filter1
Network=224.0.0.1/32
Removes a Multicast Filter rule from an existing filter
->remove mcast-filter-rule McastFilter=MyFilter
Network=*
Removes all Multicast Filter rules from a Multicast Filter
mcast-filter-set
Manage Multicast Filtersets.
Supported actions: add, help, remove, set, show
Item Description
add mcast-filter-set Create a Multicast Filterset.
Syntax
add mcast-filter-set
[Labels=[,...]
[Color=]
Parameter
McastFilterSetName
(required)
Unique name of the Multicast Filterset to create
Properties
Labels (optional) Labels assigned to this Multicast Filterset. Labels are used in the GUI to
help manage large numbers of filters. Labels can be assigned in the CLI,
but are only used in the GUI. A maximum of 16 labels can be assigned.
Color (optional) Color assigned to this Multicast Filterset. Color is used in the GUI to help
manage large numbers of filters. A color can be assigned in the CLI, but is
only used in the GUI. Allowed colors are red, green, blue, purple, or
orange.
Examples
->add mcast-filter-set MyMcastFilterSet
Creates a new Multicast Filterset and adds it to the domain
->add mcast-filter-set Filterset1 Labels="label1,
label2"
Creates a new Multicast Filterset with labels label1 and label2
->add mcast-filter Filterset1 Color=red
Creates a new Multicast Filterset with color red
Item Description
remove mcast-filter-set Remove a Multicast Filterset.
Syntax
remove mcast-filter-set McastFilterSetName> | *