HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 99)

Command line 99
Item Description
->show server-port-map
Displays a summary of all the server port mappings
->show server-port-map MyProfile:1
Displays the server port mapping for a profile
->show server-port-map *
Displays detailed output of all server port mappings
server-port
Display the physical server ports.
Supported actions: help, show
Item Description
show server-port Display physical server port information. If the port is unlinked and no connectivity
exists, the cause is displayed. For more information about possible causes, see
"Port status conditions (on page
181 )."
Syntax
show server-port []
Parameter
PortID (Optional) The reference of a port mapping ID. The PortID format is
. The PortID can be referenced from the ID column
in the summary. The detailed display shows all FlexNICs that could be associated
with a server port.
Examples
->show server-port
Displays a summary of all physical server ports
->show server-port *
Displays detailed information for all physical server ports
->show server-port enc0:3:d2
Displays detailed information for a specific server port
->show server-port enc0:1:d4
Displays detailed information for the Device Control Channel
server
Manage server blades.
Supported actions: help, poweroff, poweron, reboot, show
Item Description
poweroff server Power off one or more physical servers.
Syntax
poweroff server [-Force|-ForceOnTimeout]
[-timeout=]
Parameter
ServerID (required) The ID of a physical server in the domain. The format of the server ID is
. If the EnclosureID is not specified, the local
enclosure is used by default. Use "*" to power off all servers in the domain. For a
multi-blade server, the ServerID must be that of the monarch bay. This is the ID
displayed by the show server command.
Options