HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 54)

Command line 54
Supported actions: help, set, show
Item Description
set lacp-timer Set the domain default LACP timer.
Syntax
set lacp-timer default=
Properties
Default (required) Specifies whether the domain default LACP timer setting is short (one second) or
long (30 seconds)
Examples
->set lacp-timer default=Short
Sets the domain default LACP timer to the short setting (one second)
->set lacp-timer default=Long
Sets the domain default LACP timer to the long setting (30 seconds)
Item Description
show lacp-timer Display the domain default LACP timer setting.
Syntax
show lacp-timer
Example
->show lacp-timer
Displays the current domain default LACP timer
ldap-certificate
View and upload LDAP certificates from a remote FTP server.
Supported actions: help, load, remove, show
Item Description
load ldap-certificate Download an LDAP certificate from a remote FTP server and apply it to the VC
domain.
Syntax
load ldap-certificate
Address=
-or-
load ldap-certificate
Address= Filename=
Properties
Address (required) A valid IP address or host name of the FTP server, including user name,
password, and name of the certificate file on the server.
Place brackets around the IPv6 address in the FTP URL..
Filename (required) The name of the LDAP certificate file on the server. The filename can also be given
separately.
The file path given will be treated as relative to the login directory for the user on
the FTP server. The user should ensure that the permissions are appropriate for the
transfer to succeed.
Examples
->load ldap-certificate
Address=ftp://user:[email protected]/new-ldap.crt
Downloads LDAP certification from the remote FTP server