HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 115)

Command line 115
Item Description
reset statistics Reset per-port statistics for the specified port ID and its associated subports.
Syntax
reset statistics
Parameter
PortID (required) The port ID on which to reset statistics. The port ID is in the format
::.
A listing of the possible uplink port IDs can be obtained by using the show
uplinkport command.
Examples
->reset statistics enc0:3:X1
Resets the statistics for uplink port X1 on the interconnect module in bay 3 of the local
enclosure
->reset statistics enc0:1:d3
Resets statistics for downlink port d3 on the Ethernet interconnect module in bay 1 of the
local enclosure
Item Description
show statistics Display statistics for the specified physical port, FlexNIC, or the aggregated statistics
for the specified LAG.
Syntax
show statistics | <[-summary]
|
PortID=>>
Parameter
PortID (optional) The port ID on which to display statistics information. The port ID is in the format:
• Uplink port—::
• Downlink port—:::
[]
SubPortLabel for a downlink port is optional.
A listing of the possible uplink port IDs can be obtained by using the show
uplinkport command.
Option
summary Displays a per port summary for the members of the specified LAG
Properties
LAGID (optional) The LAG ID on which to display statistics information. The LAG ID is in the format
::. LagLabel must be in the format
lagNN, where NN is the LAG number.
PortID (optional) The ID of the port on which to display statistics information. The port ID is in the format
::.
Examples
->show statistics enc0:3:X1
Displays statistics for uplink port X1 on interconnect module 3 of the primary enclosure
->show statistics enc0:1:d3
Displays statistics for downlink port d3 on Ethernet interconnect module 1 of the
primary enclosure
->show statistics enc0:1:d1:v1
Displays statistics for subport v1 of downlink port d1 on Ethernet interconnect module
1 of the primary enclosure
->show statistics PortID=enc0:1:X1
Displays statistics for uplink port X1 on interconnect module 1 of the primary enclosure