KROHNE IFC 300 Converter EN - Manual (Page 140)

6
OPERATION
140
IFC 300
www.krohne.com 08/2010 - 4000069803 - MA IFC 300 R04 en
Simulation of the measured values
Messages on the display Description Actions
Status: C _ _ _ _ _ Output values partially simulated or
fixed Maintenance required.
C checks in progress Test mode of the device. Measured values
are possibly simulated values or values with
fixed settings.
Message depending on the situation via
HART
® or FDT. Depiction via display if
outputs are held by control input or set to
zero.
C test sensor Test function of the measuring sensor
electronics is active.
-
C simulation fieldbus Values on the Foundation Fieldbus interface
are simulated.
-
C sensor option PF Test function of the measuring sensor for
partly filled pipes is active.
-