KROHNE OPTIWAVE 5200 C_F EN - Manual (Page 7)

SAFETY INSTRUCTIONS
1
7
OPTIWAVE 5200 C/F
www.krohne.com 07/2013 - 4001904902 - HB OPTIWAVE 5200 R02 en
1.1 Software history
"Firmware revision" agrees with NAMUR NE 53. It is a series of numbers used to record the
revision status of embedded software (firmware) in electronic equipment assemblies. It gives
data on the type of changes made and the effect that changes have on compatibility.
Data about software revisions is shown in menu 1.1.0 IDENT. For more data, refer to Function
description on page 68. If it is not possible to refer to the device menu, record the serial number
of the device (given on the device nameplate) and speak to the supplier.
1.2 Intended use
This radar level transmitter measures distance, level, mass, volume, flow rate (in open
channels) and reflectivity of liquids, pastes and slurries. It does not touch the measured product.
Release
date Printed circuit
assembly Firmware
revision Hardware
revision Changes and
compatibility Documentation
2013-01-11 Converter 1.00.05 4000342401k - HB OPTIWAVE 5200 R01
Sensor 1.00.06 4001025501h
HMI (LCD display option) 1.00.03 4000487601n
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.