KROHNE OPTIWAVE 5200 C_F EN - Manual (Page 142)

10
APPENDIX
142
OPTIWAVE 5200 C/F
www.krohne.com 07/2013 - 4001904902 - HB OPTIWAVE 5200 R02 en
JIS B2220 Flanges
H U P 10K 50A RF 4
L U P 10K 80A RF
M U P 10K 100A RF
P U P 10K 150A RF
R U P 10K 200A RF 5
Alternative flange faces
0 Without
2 Form B2, EN 1092-1
(surface roughness must be specified in the order)
3 Form C, EN 1092-1 (Tongue)
4 Form D, EN 1092-1 (Groove)
5 Form E, EN 1092-1 (Male)
6 Form F, EN 1092-1 (Female)
B FF, ASME B16.5 (Flat face)
0 0 0 0 Version Version Version Version
0 Standard orders and orders for solid applications in China
6 Orders with FCC radio approval
(FCC Part 15 and RSS-210)
A Orders for liquid applications in China
0 0 Adaptor Adaptor Adaptor Adaptor
0 Without
1 Adaptor for BM 70x flange system
0 TAG Number TAG Number TAG Number TAG Number
0 Without
1 Tag No. stainless steel plate
(16 characters max.)
Extra option Extra option Extra option Extra option
0 Without
1 NACE design
(MR0175 / MR0103 / ISO 15156)
3 Heating / Cooling 6
5 Purge 6
6 Purge + Heating / Cooling 6
XF50 XF50 XF50 XF50 4 0 0 0 0 0 0 0 Order code Order code Order code Order code
1 For device dimensions, refer to the "Dimensions and weights" section
2 For the PP Wave Horn antenna option only
3 Other flange faces are available. Refer to your local supplier for more data. Flanges with the PTFE Wave Horn antenna option have a
slip on-type design with an anti-blowout feature.
4 Minimum flange size for the PTFE Wave Horn antenna. This is not available for the Metallic Horn antenna.
5 This flange is not available for the PTFE Wave Horn antenna option
6 For DN150 and DN200 Metallic Horn antenna only