beautypg.com

Electrical connections – KROHNE OPTIWAVE 5200 C_F EN User Manual

Page 44

background image

4

ELECTRICAL CONNECTIONS

44

OPTIWAVE 5200 C/F

www.krohne.com

07/2013 - 4001904902 - HB OPTIWAVE 5200 R02 en

• Loosen the lock screw with a 2.5 mm Allen wrench.
• Turn the cover counterclockwise with a strap wrench.
• Remove the cover.

Equipment needed:

• Small slotted tip screwdriver (not supplied)

Procedure:

1 Do not disconnect the safety cord from the terminal compartment cover. Put the terminal

compartment cover adjacent to the housing.

2 Remove the connector from the circuit board.
3 Connect the electrical wires to the connector. Attach the connector to the circuit board. Tight-

en the cable entry glands.

Figure 4-2: How to open the terminal compartment cover

Figure 4-3: Procedure for electrical installation