KROHNE OPTIWAVE 5200 C_F EN - Manual (Page 107)

TECHNICAL DATA
8
107
OPTIWAVE 5200 C/F
www.krohne.com 07/2013 - 4001904902 - HB OPTIWAVE 5200 R02 en
NEPSI Ex ia IIC T2~T6 Gb or Ex ia IIC T2~T6 Ga/Gb DIP A20/A21 T
A
T90°C IP6X
Ex d ia IIC T2~T6 Gb or Ex d ia IIC T2~T6 Ga/Gb DIP A20/A21 T
A
T90°C IP6X
Other standards and approvals Other standards and approvals Other standards and approvals Other standards and approvals
SIL
- only for 4...20 mA HART output
Compact version only: SIL 2 - according to EN 61508 and for high/low demand mode
operation
EMC Electromagnetic Compatibility Directive 2004/108/EC in conjunction with
EN 61326-1 (2006)
SIL 2-approved devices agree with EN 61326-3-1 (2008) and EN 61326-3-2 (2008)
Radio approvals R & TTE R & TTE R & TTE R & TTE
Radio Equipment and Telecommunications Terminal Equipment Directive
1999/5/EC in conjunction with ESTI EN 302 372 (2006)
FCC Rules FCC Rules FCC Rules FCC Rules
Part 15
Industry Canada Industry Canada Industry Canada Industry Canada
RSS-210
LVD Low-Voltage Directive 2006/95/EC in conjunction with EN 61010-1 (2001)
NAMUR NAMUR NE 21 Electromagnetic Compatibility (EMC) of Industrial Process and
Laboratory Control Equipment
NAMUR NE 43 Standardization of the Signal Level for the Failure Information of
Digital Transmitters
NAMUR NE 53 Software and Hardware of Field Devices and Signal Processing
Devices with Digital Electronics
NAMUR NE 107 Self-Monitoring and Diagnosis of Field Devices
CRN This certification is applicable for all Canadian provinces and territories. For more
data, refer to the website.
Construction code Metallic Horn and Wave Guide antennas: NACE MR0175 / ISO 15156; NACE MR0103
1 If the process connection temperature is more than 150°C / 302°F and the device has Kalrez® 6375 or FKM/FPM gaskets, the device
will also have an high temperature extension between the converter and the process connection. Kalrez® is a registered trademark of
DuPont Performance Elastomers L.L.C.The process connection temperature must agree with the temperature limits of the gasket ma-
terial.
2 Metaglas® is a registered trademark of Herberts Industrieglas, GMBH & Co., KG
3 HART® is a registered trademark of the HART Communication Foundation
4 Only the 3.6 mA error signal is applicable to SIL-approved devices