Operation, 1 user modes 6.2 normal mode – KROHNE OPTIWAVE 5200 C_F EN User Manual

Page 61

OPERATION

OPTIWAVE 5200 C/F

www.krohne.com

07/2013 - 4001904902 - HB OPTIWAVE 5200 R02 en

6.1 User modes

6.2 Normal mode

This mode shows measurement data. Use the table that follows:

• for the selection of the measurement type (level, distance, percentage, conversion, reflection)

and

• for the selection of the measurement units

Some measurement types will only be available if the device has the correct parameters entered
in the configuration mode.

Keypad functions

Normal mode

This mode displays measurement data. For more data, refer to

Normal

mode

on page 61.

Configuration mode

Use this mode to view parameters, commission the device, create tables
for volume or mass measurement, change critical values to measure in
difficult process conditions. To get access to supervisor menu, refer to

Protection of the device settings

on page 78. For more data on menu items,

refer to

Function description

on page 68.

Button

Description

Function

"Hot key" function

Right

Enter configuration mode.

Return /

Escape

Change the measurement units.

Down

Change the measurement type.

Display language will change to

English

1 The display language will change when you push this button for 2 seconds. Push the button again and it will go back to

the original language.