GW Instek GDS-3000 Series User Manual - Manual (Page 76)

GDS-3000 Series User Manual
76
Cursor Measurement
Horizontal or vertical cursors are used to show the position and
values of waveform measurements and math operation results.
These results cover voltage, time, frequency and other math
operations. When the cursors (horizontal, vertical or both) are
activated, they will be shown on the main display unless turned off.
(page 111).
Use Horizontal Cursors
Panel Operation/
Range 1. Press the Cursor key once.
Cursor
2. Press H Cursor from the bottom
menu.
3. Press H Cursor repeatedly to
toggle the cursor type.
Range
Left cursor ( ) movable, right
cursor position fixed
Right cursor ( ) movable, left
cursor position fixed
Left and right cursor ( + )
movable together
4. The cursor position
information appears on the
top left hand side of the
screen
Cursor Time, Voltage/Current
Cursor Time, Voltage/Current
Delta (difference between cursors)