GW Instek GDS-3000 Series User Manual - Manual (Page 21)

GETTING STARTED
21
Reference Key
R
Press the Reference key to set or
remove reference waveforms.
BUS Keys
B1 B2
The Serial bus decode keys are
used for UART, I
2 C and SPI serial
bus interface decoding. The serial
bus decode function is an optional
extra. See page 95 for details.
Function Keys The Function Keys are used to enter and configure
different functions on the GDS-3000.
Measure Configures and runs automatic
measurements.
Cursor Configures and runs cursor
measurements.
Test
Test
Configures and runs GW Instek
applications and optional
functions such as the Power
Analysis measurement software.
Acquire Configures the Acquisition mode.
Display Configures the display settings.
Help Shows the Help menu.
Save/Recall Used to save and recall
waveforms, images and panel
settings.
Utility Configures the print/save key,
display time, language and
calibration.