GW Instek GDS-3000 Series User Manual - Manual (Page 154)

GDS-3000 Series User Manual
154
Save Image
Panel Operation 1. To save to USB, connect a
USB drive to the front or
rear panel USB port. If a
USB drive is not connected,
images will be saved to the
internal memory.
Note: Only one host
connection, front or rear, is
allowed at a time.
Front Rear
Host
2. Press the Save/Recall key from the
front panel.
Save/Recall
3. Pres Save Image from the bottom
menu.
4. Press File Format to choose PNG or
BMP file types.
Range DSxxxx.bmp, DSxxxx.png
5. Press Ink Saver to toggle Ink Saver
On or Off.
Ink Saver On Ink Saver Off