GW Instek GDS-3000 Series User Manual - Manual (Page 194)

GDS-3000 Series User Manual
194
F
AQ
• I connected the signal but it does not appear on the display.
• I want to remove the (Measurement result / FFT result / Help
contents) from the display.
• The waveform does not update (frozen).
• The probe waveform is distorted.
• Autoset does not catch the signal well.
• I can’t save files to the internal memory.
• The display image printout is too dark on the background.
• The date and time setting are not correct.
• The accuracy does not match the specification.
• When trying to perform Vertical Accuracy Calibration, error messages
always appear.
I connected the signal but it does not appear on the display.
Make sure you have activated the channel by pressing the Channel
key (the channel key lights up).