GW Instek GDS-3000 Series User Manual - Manual (Page 159)

SAVE/RECALL
159
4. Press To (internal memory) or To
File and choose a destination to
save.
To Set1~Set20
To File DSxxxx.set
5. Press Save Now to confirm saving.
When completed, a message
appears at the bottom of the
display.
Note
The file will not be saved if the
power is turned Off or the USB
drive is taken out before the
message ends.
USB File Utility To edit USB flash drive contents
(create/ delete/ rename files and
folders) or to set the file path, press
File Utilities. For details, see 166.
Edit Label To edit labels for Setup files, press Edit
Label. For more details on editing
labels, see page 151.