Edwards Signaling FSC Series - Manual (Page 66)

Chapter 4: Dialer programming
58 FSC Series Technical Reference Manual
Table 22: IDC 4/2 event activation code options
Option Description Values
IDC Alm CDE Determines the 4/2 code that the dialer
transmits when the IDC is activated and
the IDC is an alarm-verified or alarm-
unverified zone type 0 to 9, and A to F
Default: 1 where n is the 1
to 9 (IDC 1 to 9), and A (IDC
10)
IDC WF CDE Determines the 4/2 code that the dialer
transmits when the IDC is activated by a
waterflow switch and the IDC is a
waterflow, waterflow-retard, waterflow/
supervisory, or waterflow-
retard/supervisory zone type 0 to 9, and A to F
Default: 2 where n is the 1
to 9 (IDC 1 to 9), and A (IDC
10)
IDC Trb CDE Determines the 4/2 code that the dialer
transmits when the IDC wiring is open 0 to 9, and A to F
Default: 7 where n is the 1
to 9 (IDC 1 to 9), and A (IDC
10)
IDC Sup CDE Determines the 4/2 code that the dialer
transmits when the IDC is activated by a
supervisory device and the IDC is a
supervisory, waterflow/ supervisory, or
waterflow-retard/supervisory zone type 0 to 9, and A to F
Default: 3 where n is the 1
to 9 (IDC 1 to 9), and A (IDC
10)
IDC Mon CDE Determines the 4/2 code that the dialer
transmits when the IDC is activated and
the IDC is monitor zone type 0 to 9, and A to F
Default: 3 where n is the 1
to 9 (IDC 1 to 9), and A (IDC
10)
Setting NAC 4/2 event activation code
options
Table 23 lists the set of NAC 4/2 event activation code options and their default
values.
Review Table 23 and make changes as required.
Table 23: NAC 4/2 event activation codes
Option Description Values
NAC Trb CDE Determines the 4/2 code that the dialer
transmits when the NAC wiring is open or
shorted 0 to 9, and A to F
Default: 6 where n is the 1
to 4 (NAC 1 to 4)