Edwards Signaling FSC Series - Manual (Page 13)

Chapter 1: System overview and operation
FSC Series Technical Reference Manual 5
Panel controls and indicators
Figure 1: Location of the panel controls, LEDs, and LCD display
Table 4: Descriptions of the panel controls and indicators
Item Name Description
1 LCD text display Provides supplemental information relevant to the
current functional condition of the control panel.
Available only when a dialer is installed.
2 System status LEDs Alarm: On indicates an active alarm zone.
Trouble: On indicates a system trouble. For example,
an open, shorted, or disabled circuit, a ground fault, a
battery trouble, an annunciator trouble, or a walk test.
Supervisory (SUP): On indicates an active supervisory
zone.
Power: On indicates the control panel has AC power.
Disable: Double-flashes indicate a disabled IDC, NAC,
remote relay module, or dialer when the control panel is
normal. On indicates a disabled IDC, NAC, remote relay
module, or dialer when the control panel is in alarm.
Waterflow: On indicates an active waterflow switch.
ALARM TBL
SUP/
MON
RESET
1
DISABLE 3
DISABLE 5
DISABLE NAC 1
DISABLE NAC 2
DISABLE 2
DISABLE 4
DISABLE
WALK
TEST
SIGNAL
SILENCE
& DRILL
REMOTE
DISCON-
NECT
PANEL
SILENCE
ALARM TROUBLE SUP POWER DISABLE
WATER-
FLOW
ANNUN
TROUBLE
BATT
TROUBLE
GND
FAULT
SERVICE
DETECTOR
LAMPTEST
1
2
3
5
4