Edwards Signaling FSC Series - Manual (Page 10)

Chapter 1: System overview and operation
2 FSC Series Technical Reference Manual
System overview
FSC Series conventional fire alarm control panels are available in the models
listed below.
Table 1: Control panel models
Model Description
E-FSC302(G/R) Three-zone panel (3 IDCs, 2 NACs), 120 V, gray or red cabinet
E-FSC302(G/R)D Three-zone panel (3 IDCs, 2 NACs), 120 V, gray or red cabinet, and
F-series dialer/modem
E-FSC502(G/R) Five-zone panel (5 IDCs, 2 NACs), 120 V, gray or red cabinet
E-FSC502D Five-zone panel (5 IDCs, 2 NACs), 120 V, gray or red cabinet, and
F-series dialer/modem
E-FSC1004(G/R) Ten-zone panel (10 IDCs, 4 NACs), 120 V, gray or red cabinet
E-FSC1004(G/R)D Ten-zone panel (10 IDCs, 4 NACs), 120 V, gray or red cabinet, and
F-series dialer/modem
Note: Each panel is configured for Class B operation. Five- and ten-zone models
can easily be converted to Class A by using two Class B circuits to make one
Class A circuit.
Control panel accessories are listed in the table below.
Table 2: Control panel accessories
Model Description
FSRSI Remote system indicator module with five LEDs for indicating system
status (power, alarm, supervisory, trouble, and ground fault), and a lamp
test button
FSRZI-A Remote zone indicator module with five red LEDs for indicating active
alarm zones
FSRZI-SA Remote zone indicator module with five bicolor (red/yellow) LEDs for
indicating active alarm, supervisory, and monitor zones
FSRRM24 Remote relay module with five Form C relays. Jumper configurable for
dry contact or 24 V output.
FSUIM Universal interface module with five common supervised inputs and
nine common dry contact relay outputs
FSRA10(F) Remote annunciator for ten-zone panels. Ten bicolor (red/yellow) LEDs
for indicating active zones and ten yellow LEDs for indicating zone
troubles.
FSRA10C(F) Remote annunciator with common controls for ten-zone panels. Ten
bicolor (red/yellow) LEDs for indicating active zones and ten yellow
LEDs for indicating zone troubles.