Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) - Manual (Page 355)

Brocade Virtual ADX Switch and Router Guide 341
53-1003246-01
Displaying BGP4+ information
9
TCP Connection
state The state of the connection with the neighbor. The connection can have one of the following
states:
•
LISTEN – Waiting for a connection request.
•
SYN-SENT – Waiting for a matching connection request after having sent a connection
request.
•
SYN-RECEIVED – Waiting for a confirming connection request acknowledgment after
having both received and sent a connection request.
•
ESTABLISHED – Data can be sent and received over the connection. This is the normal
operational state of the connection.
•
FIN-WAIT-1 – Waiting for a connection termination request from the remote TCP, or an
acknowledgment of the connection termination request previously sent.
•
FIN-WAIT-2 – Waiting for a connection termination request from the remote TCP.
•
CLOSE-WAIT – Waiting for a connection termination request from the local user.
•
CLOSING – Waiting for a connection termination request acknowledgment from the
remote TCP.
•
LAST-ACK – Waiting for an acknowledgment of the connection termination request
previously sent to the remote TCP (which includes an acknowledgment of its connection
termination request).
•
TIME-WAIT – Waiting for enough time to pass to be sure the remote TCP received the
acknowledgment of its connection termination request.
•
CLOSED – There is no connection state.
Byte Sent The number of bytes sent.
Byte Received The number of bytes received.
Local host The IPv6 address of the Virtual ADX device.
Local port The TCP port the Virtual ADX device is using for the BGP4+ TCP session with the neighbor.
Remote host The IPv6 address of the neighbor.
Remote port The TCP port the neighbor is using for the BGP4+ TCP session with the Virtual ADX device.
ISentSeq The initial send sequence number for the session.
SendNext The next sequence number to be sent.
TotUnAck The number of sequence numbers sent by the Virtual ADX device that have not been
acknowledged by the neighbor.
TotSent The number of sequence numbers sent to the neighbor.
ReTrans The number of sequence numbers that the Virtual ADX device retransmitted because they
were not acknowledged.
UnAckSeq The current acknowledged sequence number.
IRcvSeq The initial receive sequence number for the session.
RcvNext The next sequence number expected from the neighbor.
SendWnd The size of the send window.
TotalRcv The number of sequence numbers received from the neighbor.
DupliRcv The number of duplicate sequence numbers received from the neighbor.
RcvWnd The size of the receive window.
SendQue The number of sequence numbers in the send queue.
TABLE 9 BGP4+ neighbor configuration information and statistics (Continued)
This field... Displays...