Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) - Manual (Page 303)

Brocade Virtual ADX Switch and Router Guide 289
53-1003246-01
Displaying BGP4 information
8
Last Connection Reset Reason
(cont.) Reasons specific to the implementation:
•
Reset All Peer Sessions
•
User Reset Peer Session
•
Port State Down
•
Peer Removed
•
Peer Shutdown
•
Peer AS Number Change
•
Peer AS Confederation Change
•
TCP Connection KeepAlive Timeout
•
TCP Connection Closed by Remote
•
TCP Data Stream Error Detected
Notification Sent If the device receives a notification message from the neighbor, the
message contains an error code corresponding to one of the following
errors. Some errors have subcodes that clarify the reason for the error.
Where applicable, the subcode messages are listed underneath the error
code messages.
•
Message Header Error:
•
Connection Not Synchronized
•
Bad Message Length
•
Bad Message Type
•
Unspecified
•
Open Message Error:
•
Unsupported Version
•
Bad Peer As
•
Bad BGP4 Identifier
•
Unsupported Optional Parameter
•
Authentication Failure
•
Unacceptable Hold Time
•
Unspecified
•
Update Message Error:
•
Malformed Attribute List
•
Unrecognized Attribute
•
Missing Attribute
•
Attribute Flag Error
•
Attribute Length Error
•
Invalid Origin Attribute
•
Invalid NextHop Attribute
•
Optional Attribute Error
•
Invalid Network Field
•
Malformed AS Path
•
Unspecified
•
Hold Timer Expired
•
Finite State Machine Error
•
Cease
•
Unspecified
Notification Received See above.
TABLE 41 BGP4 neighbor information (Continued)
This field... Displays...