Displaying ospf route information – Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) User Manual
Page 158
144
Brocade Virtual ADX Switch and Router Guide
53-1003246-01
Displaying OSPF information
6
Displaying OSPF route information
To display OSPF route information, enter the following command at any CLI level.
Syntax: show ip ospf routes [ip-addr]
The ip-addr parameter specifies a destination IP address. If you use this parameter, only the route
entries for that destination are shown.
This display shows the following information.
Adjacent Neighbor Count
The number of adjacent neighbor routers.
Neighbor:
The neighbor router’s ID.
TABLE 17
CLI display of OSPF route information
This field...
Displays...
Index
The row number of the entry in the router’s OSPF route table.
Destination
The IP address of the route's destination.
Mask
The network mask for the route.
Path_Cost
The cost of this route path. (A route can have multiple paths. Each path
represents a different exit port for the Layer 3 Switch.)
Type2_Cost
The type 2 cost of this path.
Path_Type
The type of path, which can be one of the following:
•
Inter – The path to the destination passes into another area.
•
Intra – The path to the destination is entirely within the local area.
•
External1 – The path to the destination is a type 1 external route.
•
External2 – The path to the destination is a type 2 external route.
Adv_Router
The OSPF router that advertised the route to this Brocade Layer 3 Switch.
Link-State
The link state from which the route was calculated.
TABLE 16
Output of the show ip ospf interface command
This field
Displays
Virtual ADX show ip ospf routes
Index Destination Mask Path_Cost Type2_Cost Path_Type
1
10.95.7.0 255.255.255.0 1 0 Intra
Adv_Router Link_State Dest_Type State Tag Flags
10.35.1.220 10.95.7.251 Network Valid 00000000 7000
Paths Out_Port Next_Hop Type Arp_Index State
1 3
10.95.7.250 OSPF 8 84 00
Index Destination Mask Path_Cost Type2_Cost Path_Type
2 10.3.63.0 255.255.255.0 11 0 Inter
Adv_Router Link_State Dest_Type State Tag Flags
10.95.7.250 10.3.63.0 Network Valid 00000000 0000
Paths Out_Port Next_Hop Type Arp_Index State
1 3
10.95.7.250 OSPF 8 84 00