Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) - Manual (Page 197)

Brocade Virtual ADX Switch and Router Guide 183
53-1003246-01
Displaying OSPFv3 information
7
The network number displays detailed information about the network LSAs only.
The router number displays detailed information about the router LSAs only.
The scope area-id parameter displays detailed information about the LSAs for a specified area,
The as parameter displays detailed information about the AS LSAs.
The link parameter displays detailed information about the link LSAs.
This display shows the following information:
TABLE 24 OSPFv3 database summary fields
This Field... Displays...
Area ID The OSPF area in which the Brocade device resides.
Type Type of LSA. LSA types can be the following:
•
Rtr – Router LSAs (Type 1).
•
Net – Network LSAs (Type 2).
•
Inap – Inter-area prefix LSAs for ABRs (Type 3).
•
Inar – Inter-area router LSAs for ASBRs (Type 4).
•
Extn – AS external LSAs (Type 5).
•
typ7 – NSSA LSA (Type 7).
•
Link – Link LSAs (Type 8).
•
Iap – Intra-area prefix LSAs (Type 9).
LS ID The ID of the LSA, in hexadecimal, from which the device learned this route.
Adv Rtr The device that advertised the route.
Seq(Hex) The sequence number of the LSA. The OSPF neighbor that sent the LSA stamps
it with a sequence number to enable the Brocade device and other OSPF
routers to determine which LSA for a given route is the most recent.
Age The age of the LSA, in seconds.
Chksum A checksum for the LSA packet. The checksum is based on all the fields in the
packet except the age field. The Brocade device uses the checksum to verify
that the packet is not corrupted.
Len The length, in bytes, of the LSA.