Connectivity 24 – Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" User Manual
Page 24
Connectivity
24
RUN Mode Peripherals - COM2: RS-485 (isolation)
NOTE: For instructions on how to connect to other devices, always refer to the “GP-
Pro EX Device/PLC Connection Manual”.
RUN Mode Peripherals - Ethernet Communication
GP unit
Host Controller
PLC etc.
Serial Interface (COM2: RS-485 (isolation) mode)
PROFIBUS Cable
(Prepared by user)
RS-485 Cable
(Prepared by user)
MPI Cable
CA3-MPI-PG1-PFE
CA3-MPI-PGN-PFE
RS-485 (isolation) Port
RS-485 (isolation) Port
RS-485 (isolation) Port
GP unit
Ethernet Interface
(10BASE-T/100BASE-TX)
Twisted Pair Cable
(commercial type)
Hub
(commercial type)
To an Ethernet Network
This manual is related to the following products:
- GP4500R - 10.4 Standard HMIs with Rear Mounting Options" GP4400R - 7.5 Standard HMI with Rear Mounting Options" GP4300R - 5.7 Standard HMI with Rear Mount" GP4300M - 5.7 Modular HMI" GP4200M - 3.5 Modular HMI" GP4500 - 10.4 W Model HMI" GP4400 - 7.0 W Model HMI" GP4300 - 5.7 W Model HMI" GP4200 - 3.5 W Model HMI" GP4600 - 12.1 Standard HMIs" GP4500 - 10.4 Standard HMIs" GP4400 - 7.5 Standard HMI" GP4300 - 5.7 Standard HMI" GP4200 - 3.5 Standard HMIs"