Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" User Manual
Page 133
GP4000 Series Hardware Manual
133
Panel Cut Dimensions
Create a panel cut and insert the GP unit into the opening from the front.
NOTE:
Before designing the panel cut, refer to Installation (see page 136).
Installation Fastener Dimensions
A
B
C
R
301.5 mm (+1, -0 mm)
(11.87 [+0.04, -0 in.])
227.5 mm (+1, -0 mm)
(8.96 in. [+0.04, -0 in.])
1.6...5 mm
(0.06...0.2 in.)
3 mm (0.12 in.)
maximum
A
C
R
B
12 0.47
12
0.47
14
0.55
M6
26
1.02
mm
in.
Ш10
Ш0.39
This manual is related to the following products:
- GP4500R - 10.4 Standard HMIs with Rear Mounting Options" GP4400R - 7.5 Standard HMI with Rear Mounting Options" GP4300R - 5.7 Standard HMI with Rear Mount" GP4300M - 5.7 Modular HMI" GP4200M - 3.5 Modular HMI" GP4500 - 10.4 W Model HMI" GP4400 - 7.0 W Model HMI" GP4300 - 5.7 W Model HMI" GP4200 - 3.5 W Model HMI" GP4600 - 12.1 Standard HMIs" GP4500 - 10.4 Standard HMIs" GP4400 - 7.5 Standard HMI" GP4300 - 5.7 Standard HMI" GP4200 - 3.5 Standard HMIs"